this paper focused on a novel method of electroless plating ruthenium (ru) on solid or porous substrates like porous stainless steel (pss) discs or ceramic tubes. a novel complexing plating bath of ru was developed. it is proven that ru can be deposited directly on these substrates by the bath at a temperature of 328 k and strong alkaline environment. tga, sem, edx and xrd confirmed the success...

This paper focused on a novel method of electroless plating ruthenium (Ru) on solid or porous substrates like porous stainless steel (PSS) discs or ceramic tubes. A novel complexing plating bath of Ru was developed. It is proven that Ru can be deposited directly on these substrates by the bath at a temperature of 328 K and strong alkaline environment. TGA, SEM, EDX and XRD confirmed the success...

This paper summarizes R&D activities and progress at NORAM Engineering and the University of British Columbia (UBC) on preparation and testing of thin palladium-based membranes and their applications. Most of these activities were carried out internally at NORAM, some jointly with UBC and their spin-off company, Membrane Reactor Technology (MRT) through a wide range of projects. Key results out...

A major hurdle for the wide spread commercialization of proton exchange membrane based fuel cells (PEMFCs) and water electrolyzers are durability high cost noble metal catalysts. Here, alternative support materials might offer advantages, as they can alter properties a catalyst by means strong interaction (SMSI) that has been shown to prevent platinum oxidation suppress oxygen reduction reactio...

in this work a new resistance model has been presented based on that of henis-tripodi which can be used for interpretation of gas permeation data in composite and asymmetric membranes. in contrast to the previous works, in this model the fraction of the support layer surface that includes the pores filled with coating material has been taken into account. the influences of the filled pores on s...

in this work, novel thin film composite membranes (tfcs) of poly (ether-6-block amide) (pebax-1657) on a polyvinyl chloride (pvc) ultrafiltration membrane as support were prepared using inclined coating method for co2 separation. investigating the effects of top selective layer thickness formed by controlling the coating angle (15-60°) and polymer solution concentration (5-10 wt.%), and also, t...

In the present study, a step by step process was applied to synthesize bimetallic electrocatalyst (Ru and Pt on VulcanXC-72R). This process can reduce the amount of platinum and increase the gas diffusion electrode (GDE) performance in the cathodic reaction of polymer electrolyte membrane fuel cells (PEMFCs). Using the impregnation by hydrothermal synthesis method, a series of electrocatalysts ...

chitosan/polyethersulfone (cs/pes) composite membrane was prepared from casting chitosan solution on polyethersulfone substrate membrane. the substrate membrane was prepared by phase inversion technique using polyethersulfone (pes) and dimethylacetamide (dmac) as solvent with and without the addition of polyvinylpyrrolidone (pvp) as pore-forming agent. the effects of the composition of the c...

Ruthenium-Carbon (Ru-C) nano-composite films were prepared by plasma-enhanced chemical vapor deposition (PECVD) and the effects of deposition conditions on the microstructure and electrical properies were investigated. The films consisted of agglomerated grains of 10 to 20 nm in diameter, in which Ru particles of 2.5 to 3.5 nm in diameter were dispersed in a C matrix. The C content of the films...